Hot
New
In stock
Out of stock

Rubio Monocoat Smoke

$7.99

Rubio Monocoat Smoke creates a unique smoked effect on Oak woods. This non-toxic product reacts to the tannins that are naturally present in oak wood, accentuating the underlying character of the wood. Leaving your wood with a unique smoked look. Wood will need to be finished with RMC Oil Plus 2C ensuring optimal molecular bonding.
100 ml
1 Liter
5 Liter
Spend $79.00 to Free Shipping
ADDITIONAL
HOW TO APPLY
TECHNICAL
MAINTENANCE
CUSTOMER REVIEWS
ADDITIONAL

Rubio Monocoat Smoke is user friendly and does not release any toxic or irritating fumes or vapors. The product is designed to be post treated with Rubio Monocoat Oil 2C.

For a kit containing samples of the various colors, see our Precolor Easy / Creative Effects Sample Kit page.

SPECIFIC CHARACTERISTICS

  • Can be post-treated with Rubio Monocoat Oil 2C.
  • Provides a similar aspect as an ammonia-smoking treatment.
  • Environmentally friendly, releases no toxic fumes or vapors.

Product Brochure

HOW TO APPLY

DIRECTIONS FOR MANUAL APPLICATION:

  1. Sand the planks until the desired effect is reached.
  2. Remove any dust.
  3. Apply RMC Smoke regularly using a roller or a brush. If a smooth effect is required saturate the surface completely with the product.
  4. Wash off the excess product with water and a sponge, go over the surface and wring the sponge with the absorbed product out in the second bucket.
  5. Let the surface dry completely (12 to 48 hours).
  6. Sandpaper the surface lightly with a polisher equipped with a beige pad.
  7. Remove any dust again.
  8. Finish with Rubio Monocoat Oil. 

CONSUMPTION - MANUAL APPLICATION: 

Depending on type of wood and preparation:  +/- 215 to 430 g/sq. ft. 

These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage. 

DIRECTIONS FOR INDUSTRIAL APPLICATION:

  1. Sand the planks until the desired effect has been reached
  2. Remove any dust.
  3. Apply RMC Smoke regularly using a roller or a spray gun. If a smooth effect is required saturate the surface completely with the product. 
  4. Let the surface dry completely – to the air, with a drying tunnel or UV drying.
  5. Sand the surface lightly with a brush sanding machine, flutter or nylon.
  6. Remove any dust again.
  7. Finish with Rubio Monocoat Oil

CONSUMPTION - INDUSTRIAL APPLICATION: 

Depending on type of wood and preparation: +/- 53 to 161 g/sq. ft. 

These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.

STORAGE:

The product can be stored for up to 12 months. Store in dry conditions and in the original packaging. Keep away from frost.

Application Instructions and TDS (EN)

Application Instructions and TDS (ES)

TECHNICAL

Summarized specifications, please read TDS before using product.

Spread Rate: 200-400 ft²/L
Dry Time: Varies. Test with a moisture meter before and after to ensure full dry.
Dilutable: With Water
Shelf Life: 12 months


Warning: Do not allow to freeze

MAINTENANCE

Rubio Monocoat Smoke is a Creative Effects pre-treatment and should be finished with Oil Plus 2C.

Clean with Soap or Surface Care Spray. Maintain color and protection with Universal Maintenance Oil. Refresh and restore with Renew.

CUSTOMER REVIEWS

This site uses cookies to ensure that we give you the best experience on our website.

Rubio Monocoat Smoke 100ml

Rubio Monocoat Smoke

$7.99